Mesee 3-In-1Digital TDS EC Tester Meter Water Quality Tester and Temperature Meter Tool
– Test water quality purity, check the performance of your water filter, check for hardness to make sure you always drink pure water!
How to Use :
1se unplug the protective cap, press the switch, place the electrode into the test solution.
2r the numerical stability, press the HOLD button and take it out of the solution to read.
3 off the meter after use, have to wipe clean the electrode and re-cover the protective cap.
Mode Conversion:
– The factory default TDS data, if you need the conductivity data, please press the ”MODE” button, the instrument automatically shifted.
– Press the ”MODE ” button twice, Celsius and Fahrenheit conversed, the factory default degrees in Celsius.
Automatic Temperature Compensation:
The instrument with automatic temperature compensation function under measurement mode.
Specification:
Conductivity: 0-9999 us/cm
TDS : 0-9999 ppm
Celsius : 0.1-80.0℃
Fahrenheit : 32.0-176.0℉
Accuracy: ±2%
Battery: 3V CR2032 Button Battery (Included)
Warm Tips:
– Please don’t store the TDS under high temperature and direct sunlight.
– Please don’t drop the entire TDS meter in the water or dip beyond the maximum immersion level.
– Keep the electrode clean, cover the protective cap, please take out the batteries if idle for long periods.
– Please adopt standard buffer solution calibration, incorrect calibration would cause measurement error, thus affect the accuracy of the test solution, or cause the instrument not to work properly.
Package Included:
1 x Water Quality Tester(built-in 1 piece battery)
1 x Leather Bag
1 x User Manual