MJJC Snow Foam Lance for Nilfisk Gerni Stihle Pressure Washers New Type 2017 Rounded Fitting (PRO)

Specifications: Pressure Range: 2000psi – 5000psi Durability: 10 Years Capacity of bottle: 1000ml (1L) Construction Material: Solid Brass, Resistant Nylon & HDPE bottle Maximum Water Temperature: 60° C Chemical Resistant: Yes Foam Consumption Adjustable: Yes Spray Width Adjustable: Yes How To Use: 1. Put PTFE tape on the brass tube (two threads), each thread needs 50 cm of PTFE tape.> 2. Put the adapter with brass tube and suction tube on the foam lance unit. 3. Fill fluid bottle with your desired amount of shampoo. 4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo +80% water is suggested). 5. Shake the fluid bottle to mix the shampoo with water thoroughly. 6. Attach fluid bottle to foam lance unit. 7. Attach the adapter to the pressure washer gun and then it is ready for use. Friendly Tips: According to the feedback of the most of customers, the hose barb and the reservoir box of the Snow Foam Lance is easily damaged: 1, Due to the copper material, the hose barb and the reservoir box is easily out of shape during transport and it is difficult to be repaired. 2, In the course of use the snow foam lance, if you incautiously drop it in the ground, the product will be easy to damage. 3, The copper rubs against the plastic bottle so that the screw thread of bottle is easy to damage. Now we decide to change the copper material to other special material. The advantages are as follows: 1 test shows that, compared with the copper one, the new plastic nozzle is more resistant of being squashed and more throw-proof for its special material. 2, The plastic nozzle is less abrasive to the bottle, the damage could be neglected in most cases. 3, The product is easier to pass the customs clearance procedure for the lighter weight.