1. Signal-sided self-adhesive sticker, easy to stick and easy to work with.
2. Thickened stickers, bright colour, non-reflective, waterproof, no fading.
3. Create a simple and efficient background design for your aquarium with an attractive theme.
4. Made of high quality PVC material, non-toxic, no smell, no water stains.
5. A DIY sticker that you can cut to the size of your tank.
Specification:
Item Type:Sticker
Condition: 100% Brand New
Colour: as shown in the picture
Material: PVC.
Size: 61 x 30 cm / 61 x 40 cm / 76 x 46 cm / 91 x 50 cm / 122 x 46 cm (optional).
Size 1: approx. 61 x 30 cm / 24.0 x 11.8 inches.
Size 2: approx. 61 x 40 cm / 24.0 x 15.7 inches.
Size 3: approx. 76 x 46 cm / 29.9 x 18.1 inches.
Size 4: approx. 91 x 50 cm / 35.8 x 19.7 inches.
Size 5: approx. 122 x 46 cm / 48.0 x 18.1 inches.
Adhesive method:
1. Wipe the glass surface on the back of the aquarium, put some detergent into the water (to reduce the viscosity of the glue), spray on the glass surface (do not spray much) or wipe it with a damp cloth. Peel off the corner of the background film, start pasting after aligning the fixed position, and slowly apply an even force when pasting. If there are air bubbles during gluing, you can tear it to the bubble and spray it again to stick and scratch it. Do not slip in order, the leaking area is easy to foam and the bubble does not appear (4).
3. After installation, use a squeegee or touch to search for scratched bubbles. If there are bubbles, you can open the bladder with a needle and squeeze it with a squeegee.
4. After the paste is finished and the water is not scratched cleanly, the glue will discolour