The cold shrink band consists of butyl rubber adhesive. The butyl adhesive tape is coated with a polyethylene film, which can be stretched by up to 400%. It complies with the requirements of VDI 6022, and is therefore suitable for use in air-conditioning systems. The butyl adhesive tape is suitable for indoor use. When used for sealing against water, the tape should not be submerged. ApplicationThe application surface must be strong, clean, dry, dust-, grease- and oil-free. Brittle, porous and absorbent surfaces should be pre-primed with Multi- Primer. Before use, check whether the butyl rubber adhesive is compatible with the surface in terms of adhesive strength and chemical compatibility. The adhesive tape should spirally overlap, ex. On pipelines. For this purpose, the cover is peeled off from the adhesive, the tape is fixed on the pipe and then stretched around the pipe so that no air bubbles form between the butyl rubber adhesive and the substrate. Then press the tape firmly against the surface on which it’s applied and smooth out. Adhesive tapes with butyl rubber adhesive are sensitive to solvents. The cold shrink strip is UV-resistantuct features
neverest KSB 50 mm x 15 m x 0.6 mm Butyl Tape Indoor Waterproof Stretchable Sealing Tape | Airtight Ducts
¥6,465
- Self adhesive Butyl rubber with protective film for Permanent sealant, provides instant water tight bond, Complies with VDI 6022 for inside use in Air-conditioning systems (and more, see below), highly tear-resistant and stretchable (up to 400%), Width 50 mm x 15 m, PVC coated
- It is a waterproofing repair tape used for indoor sealing of low, medium & high pressure HVAC duct systems (includes: metal duct, fiberglass duct and flexible duct systems)
- It seals cracks and seams leaks in vans, cars and trucks. Also used for mobile home repair. Repair gouges, rips, tears in metal panels of trailers, shipping containers and metal buildings, Adhesive tapes with butyl rubber adhesive are sensitive to solvents. The cold shrink strip is UV-resistant
- The cold shrink band consists of butyl rubber adhesive. The butyl adhesive tape is coated with a polyethylene film, which can be stretched by up to 400%. It complies with the requirements of VDI 6022, page 1, and is therefore suitable for use in air-conditioning systems. The butyl adhesive tape is suitable for indoor use. When used for sealing against water, the tape should not be submerged.
- The APPLICATION surface must be strong, clean, dry, dust-, grease- and oil-free. Brittle, porous and absorbent surfaces should be pre-primed with Multi- Primer. Before use, check whether the butyl rubber adhesive is compatible with the surface in terms of adhesive strength and chemical compatibility. The adhesive tape should spirally overlap, ex. On pipelines. For this purpose, the cover is peeled off from the adhesive, the tape is fixed on the pipe and then stretched stretched around
In stock
Additional information
| Weight | 0.98 kg |
|---|---|
| brand | Klimapartner |
| dimensions | 5 x 15 x 15 cm; 935 Grams |