Specification:
Operating temperature range of -60 ℃ to +260 ℃,
tensile strength≥4.9Mpa ;
Elongation ≥ 300% ;
Dielectric strength ≥400V/mil ;
How to Use:
STEP 1 Remove dirt or oil from repair area.
STEP 2 Cut tape to length.
STEP 3 Press exposed tape firmly to the surface.
STEP 4 When applying tape, pull tightly and stretch.
STEP 5 Overlap final wrap completely to seal. Overlap additional wraps by 2/3 tape width.
STEP 6 Full cure is achieved in 24 hours.
Note:
This is not a professional tape for leakage,but a good thing if in emergency state;and the end of the tape tends to come loose,it needs wraped the end with electrical(PVC) tape to hold it in place.