Package: 1pc
Only one clamp is required to do a corner joint
This miter clamp is made from heavy gauge steel and solid brass, rust proof and rugged construction
Easy to making window casing, making door casing, etc. Tight clamps casings for the perfect glue joint every time.
Adjustment screw
Pin are retractable, if you don’t need more pins, you can use 1/8 inch (3mm) hex wrench to adjustment pin quantity
Easy to Use
Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters together while gluing
Easy to Glue
Put glue on miter then turn handle, and you will see excessive glue squeeze out down. Use a damp (not wet) cloth to remove excess glue from the joint. You get a perfect glue joint.