OP-TS211.1 is a quartz general purpose time switch designed for mounting on a surface, panel or DIN-Rail. It is programmable for 24 hour operation with a minimum captive tappet switching setting of 15 minutes. The unit can be run on Fixed On / Timed / Fixed Off selections with the accuracy being mains synchronised (typically +/- 2.5 seconds per day). There is an inbuilt re-chargeable battery cell to keep the timer running in the event of loss of power, this cell will run for 48 hours. This timer controls a volt-free changeover switch and has a resistive rating of 16 Amperes. It comes with 5 x wire-protect screw terminals. Without a contactor fitted, this timer is not suitable for discharge or LED lighting. Dimensions of the timer are: 106mm (h) x 72mm (w) 52mm (d), and the weight is 266g.
Optimum 24 Hour Time Switch, White, One Size
$127.99
- 24 hour single channel quartz time switch with 15 minute tappet intervals and a 150 hour running reserve
- Designed for surface, flush & din-rail mounting
- 16 amp resistive; 8 amp inductive
- Incandescent lamp load of 1300W
- Volt free SPDT contacts; Not suitable for discharge or LED lighting without a contactor
In stock
Additional information
| Weight | 0.22 kg |
|---|---|
| Brand | Tower Flue Components |
| EAN | 5028415005576 |
Optimum 24 Hour Time Switch, White, One Size
$118.99
- 24 hour single channel synchronous time switch with 15 minute tappet intervals
- Designed for surface, flush & din-rail mounting
- 16 amp resistive; 8 amp inductive
- Incandescent lamp load of 1300W
- Volt free SPDT contacts; Not suitable for discharge or LED lighting without a contactor
In stock
OP-TS111.1 is a synchronous general purpose time switch designed for mounting on a surface, panel or DIN-Rail. It is programmable for 24 hour operation with a minimum captive tappet switching setting of 15 minutes. The unit can be run on Fixed On / Timed / Fixed Off selections with the accuracy being mains synchronised (typically +/- 2.5 seconds per day). This timer controls a volt-free changeover switch and has a resistive rating of 16 Amperes. It comes with 5 x wire-protect screw terminals. Without a contactor fitted, this timer is not suitable for discharge or LED lighting. Dimensions of the timer are: 106mm (h) x 72mm (w) 52mm (d), and the weight is 148g.
Additional information
| Weight | 0.22 kg |
|---|---|
| Brand | Tower Flue Components |
| EAN | 5028415005545 |