O’skool 457mm (18 inches) Precision Miter Gauge with Aluminum Miter Fence and Flip StopIt won’t just a dream to make a crosscut at any angle when using the table saw if you own O’skool Miter Gauge Fence System! The fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect miters quicklySCUT PRECISE ANGLES WITH EASEThe solid steel protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5°, and 90°, both left and right. 13 pre-set common angles in total. The 13 positive stops are perfect for many woodworking projects as they are the angles that are typically used. To adjust the head you simply loosen the post knob handle, pull the spring-loaded indexing pin outward, rotate the head to the desired position, release the pin, and lock into placeERSAL FITS FOR MOST TABLE SAWSDesigned to be universal, it will fit most bench tools with any standard 19 x 9.5mm (3/4″ x 3/8″) track with a 3.175mm (1/8″) “T” slot. The slide bar has a locking washer fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the locking washerECT FOR WOOD CUTTING PROJECTThe bar is 457mm (18″) long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4″ x 3/8″) track or similar sized T-slot. Four sprung loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.
O’skool 457mm (18 inches) Miter Gauge Fence System with Standard Slot 19 x 9.5mm and Stop Holes from 0°, 22.5°, 30°, 45°, 60°, 67.5°, 90° for Universal Table Saw
$257.99
- [Universal Fit] It fits most bench tools with standard 19 x 9.5mm track and 3.175mm T slot. The slide bar has a locking washer fit into the T slot to prevent accidental lifting when feeding your stock through. If your saw does not have a T slot, you can remove the locking washer.
- [Ideal Length Miter Gauge] 457mm long aluminum fence complete with flip-up length stop for repetitive cuts. It is a high quality, well thought out and economical solution for your table saw cross-cutting needs.
- [Four Sprung Loaded Ball Bearings] The steel miter bar is equipped with four sprung loaded ball bearings on the side of the bar, the sprung loaded ball bearings and the bearings can be adjusted with the providing hex key wrench in or out to keep the bar snug in the track.
- [Accurate and Easy to Adjust] Ideal for cross-cutting wood at a specific angle, zeroed at a 90 degree, it allows the wood to be cut at any angle between 0 and 90 degrees(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°).
- [Perfect for Wood Cutting Project] Improve safety and accuracy on the table saw and the router table. Hot sale miter gauge fence system in US market.
In stock
Additional information
| Weight | 2.1 kg |
|---|---|
| brand | Brand: O'skool |
| dimensions | 50.5 x 16.99 x 8.51 cm; 2.04 Kilograms |