Item Descriptions:-[Unique Design]: Designed with small hole on its surface, soft non-slip coating underneath.-[Soft & Confortable]: Made of soft leather, provide extra comfortable feeling all round steering wheel.-[Exquisite Workmanship]: The precision drilling process enables the steering wheel cover to have strong air permeability and absorb sweat.-[Ways of Installation]: Sometimes is diefficult to install for the tight and safety , need the big strength.-[Following Steps of Install]: 1. Fit the top of the cover over the top of the wheel. Center the wheel before you start to install the cover.2. Stretch out both sides so that the cover fits over the wheel.3. Pull the bottom of the cover over the wheel.4. Use as much force as you can to get the final part of the over fitting snugly over the wheel.-[Warm Reminder]: If you can’t insall for the smaller,you can placed the cover in extremely hot water and started pulling and tugging until it loosen up a bit. Then can easy to get it on.-[Note]: Please allow 1-3cm differences due to manual measurementage:1x Leather Punched Steering Wheel Cover2x Needles2x ThreadsItem Specifications:Main Material:PU LeatherColor:Black & Red Size:SizeSteering Wheel Diameter:37-38cm(14.5″-15″?Type:Steering Wheel CoverPlacement on Vehicle:Left/Right/FrontBrand:Unbranded/GenericMPN:[AUTO FILL EAN]
OTOTEC For Car DIY Handmade Self-knitting Soft Leather Punched Steering Wheel Cover Kit 37-38cm with Needles and Threads
$44.99
- [Unique Design]: Designed with small hole on its surface, soft non-slip coating underneath.
- [Soft & Confortable]: Made of soft leather, provide extra comfortable feeling all round steering wheel.
- [Exquisite Workmanship]: The precision drilling process enables the steering wheel cover to have strong air permeability and absorb sweat.
- [Ways of Installation]: Sometimes is diefficult to install for the tight and safety , need the big strength.
- [Following Steps of Install]: 1. Fit the top of the cover over the top of the wheel. Center the wheel before you start to install the cover.2. Stretch out both sides so that the cover fits over the wheel.3. Pull the bottom of the cover over the wheel.4. Use as much force as you can to get the final part of the over fitting snugly over the wheel.
In stock
Additional information
| Weight | 0.13 kg |
|---|---|
| brand | OTOTEC |
| dimensions | 25.5 x 18.5 x 4 cm; 83 Grams |