cing guide 1. Pinch and wiggle the button out with fingers until you see the base of the button and note there is circuit cable behind it you don’t want to pull out too far! 2. Using a small flat end screwdriver slide it down the seam then up under the old button and carefully pry it off from the button holder. 3. Push the button holder back into its original position. 4. Line up your new button (gap in button is at 6 o’clock position) then push down over the button holder until it stops.
Pack of 2 Video Doorbell Push Button Compatible with Ring Doorbell Pro, Injection Moulded Buttons, Night Vison & Sensor Still Work (Black)
$38.99
- Compatibility – Our buttons work with Ring Video Doorbell Pro model.
- Value Pack of 2 – Rather than spending again on a new unit, now you get a chance to fix the issue cheaply.
- Injection Molding Design – Our material is translucent so the IR & motion sensor behind the button will still work.
- Make your doorbell water tight again – Replace the cracked button to stop water seeping through.
- Manual guide included – A guide with illustrations is included for taking out the broken button and installing the new button.
In stock