Pack of ten 26mm letterbox springs. Please note that these springs are suitable for traditional style letterboxes (eg. Victorian style). If your letterbox uses this type of spring you should be able to see the spring behind the flap. The spring slides over a long rod which also usually acts as a hinge for the flap. This type of letterbox is still manufactured, but there are also many modern styles which take much smaller springs. These modern styles are not easy to disassemble and (as far as we are aware) replacement springs are not available for them. The springs in this listing have an internal diameter suitable for rods up to 4.5mm diameter. The external diameter of the springs is 7.7mm. The arms are 24mm long. One arm may have to be shortened or bent to suit. It is difficult to provide fitting instructions for every type of letter plate, but our listing for ‘cranked arm’ letter plate springs contains instructions that may be helpful. The Northern DIY website also has a guide on ‘How to fit a Letter Plate Spring’.
Pack of Ten 26mm Zinc Plated Torsion Springs (suit Traditional Letterboxes/Letter Plates)
HKD181.95
- Pack of Ten 26mm springs for traditional letterboxes (not suitable for modern styles – see below)
- Arms 24mm long (can be trimmed with wire cutters if necessary)
- The internal diameter is suitable for rods up to 4.5mm diameter
- Sizes of 20mm and 39mm also available separately or in a mixed pack
- Made from 1.3mm diameter Zinc Plated wire for corrosion resistance
In stock
Additional information
| Weight | 0.059 kg |
|---|---|
| brand | Northern DIY |
| dimensions | 8.4 x 6.4 x 2 cm; 58.97 Grams |