TIRE MACHINE RIM PROTECTOR – NYLON HEAD INSERTS
Head Insert will stop metal demount heads creating gouges if they come into contact with a wheel rim. They rely on the plastic head inserts to protect in the event of wheel rim contact.
Most older demount heads designs will include a rudimentary metal roller for use on steel wheels. It acts as a distance stop between the rim and demount head. The roller allows contact of the demount head to the wheel rim as its turning. The roller stops drag damage to both wheel rim and fitting head.
With the ever-increasing rates of alloy wheel rims fitted to cars the demount fitting head needed updating. The metal roller was no longer viable as it damages wheel rims when rolling on wheel rim edges. Instead, Nylon inserts got used as an alternative to the design.
Newer generation fitting heads include either one or two plastic head inserts know as uppers and lowers. Nearly all demount heads use a lower head insert to protect the front and trailing wheel rim edges.
The latest designs of demount heads also include an upper nylon head insert on the leading toe. Devised to protect the front face of the wheel rim when fitting run flat tyres. The very nature of run-flat tyres creates high load forces on the leading toe. Often causing contact damage to the front face of the alloy wheel unless fitted with protective elements.
Please note: – colour may vary from the picture shown.
For any further information or queries regarding this product, please contact us where we will help answer your queries.
Tags: demount head, tyre changer head, tyre machine head, replacement part, head insert, plastic insert, plastic head insert, nylon head insert, nylon insert, tire changer rim protector, duck head tire repair part, tire machine part, plastic insert for mount demount head
Pallet Rack Safety Bolt, Universal Drop Pin, Round Top Hat Φ ¾″|0.750″(19.050mm), Width Φ 0.300″(7.620mm), Height 3.025″(76.835mm) High from Top to Bottom, Beam Locker, 1 Pack, 50 Pcs/Pack, RM76×77
$133.99
- ✅ ULTIMATE BOLT – Drop pins reduce the disengagement risk of beams becoming accidentally disconnected. If a forklift operator lifts a pallet too high, the pallet (or forks) can push beam up and cause it to disconnect from frame, resulting in pallets falling from very high up. Safety bolts offer a secure safety connection from pallet rack cross beam to upright frame and help support pallet racks and shelving units. Instantly add heavy duty reinforcement with standard or teardrop alignment holes.
- ✅ DROP-IN INSTALLATION – Pins are installed in the side of beam endplate and connect through the punch on the side of frame, which secures the beam in place and prevents it from disconnecting accidentally. Each pin clips in instantly without using tools or complicated setup. Simply insert the smaller end into a pallet rack’s alignment hole and gravity does the rest and holds them in place with low maintenance. Our pins are compatible with most styles of standard selective teardrop rack systems.
- ✅ PROFESSIONAL GRADE – Without safety clips, lift truck operators can accidentally dislodge beams from the racking, which may cause costly damage to product and threaten personnel safety. Be proactive and outfit your warehouse with drop pins before an incident takes place. Trusted by large commercial warehouses and businesses all over the world, our universal design pins with bright zinc plated finish are coated to protect against rust, useful in your business, home or DIY shelving project.
- ✅ BEST VALUE PACK – A simple solution to increase safety in rack system for warehouse managers. Simply confirm the width of punch holes and take a step towards a safer warehouse. Get the best bang for your buck with our 50-count bulk pack of universal safety pins. 50 pins can add complete locking support for up to 25 shelving cross beams. Always make sure your shelving units are reinforced with our pins to ensure top safety and support, making your warehouse a place with low risk to work.
- ✅ STOP POTENTIAL FAILURE NOW – Used rack systems often have missing or damaged safety clips which puts warehouse managers and distribution facilities at risk because pallet rack beam clips are an essential safety component of a rack system. When these clips are missing, rack systems are more susceptible to failure. Buy our drop pins for your new or used pallet rack system to keep from potential dislodging. Join thousands of satisfied business and homeowners..k Add-to-Cart to order Today!
In stock
Additional information
| Weight | 1.73 kg |
|---|---|
| brand | Ewandor |
| dimensions | 18.11 x 14 x 3.99 cm; 1.75 Kilograms |