Phone RJ11 port specifications: 1e coding: PCM coding, 64Kbps per voice 2stalk attenuation: ≥65dB 3nced noise: ≤63.7dBmop 4rtion loss: -3 ± 0.75dB 5uency characteristics: 300 to 3400 Hz (-0.6 to +3 dB) 6y port (FXO): connected to the switch 7-wire AC input impedance: 200+680//0.1 Ω (three components) 8ing voltage: 35 ~ 150V 9ing frequency: 17~60HZ 10rn loss: 20 db 11 Interface (FXS): Connect to the user’s telephone 12-wire AC input impedance: 200+680//0.1 Ω (three components) 13 line loop resistance: less than 1KΩ (including phone) 14ing voltage peak-to-peak value: 110~150V 15ing frequency: 22~28HZ 16 voltage: 28V 17 current: 20~50mA; 18rn loss: 20 db 19 flow: AC90 plus or minus 15V Ethernet RJ45 port specifications: 1. Rate: 10M/100Mbps, full duplex, half duplex fully adaptive 2. Actual transmission bandwidth: 50Mbps per network port 3. Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) 4. Physical interface: RJ45, support AUTO-MDIX (cross line straight line adaptive) Power supply: 1ing voltage AC100~240V, DC5V/2A. 2 UK power supply adapterage include: 1x Telephone Transmitter 1x Telephone Receiver 1x 3M SC/SC singlemode fiber patch cord. 2 x UK power supply adapters 1 x Manual
Primeda 2 Ports RJ11 Telephone and 10/100Mbps Ethernet Over Fiber Optic Extenders/Media Converters – PCM Voice Tel Over Fiber, Universal Single Mode and Multimode fibersmitter and Receiver Kit
$268.99
- Make sure this fits by entering your model number.
- Extend your Phones and Network: 2 Independent telephone lines + 1 Fast Ethernet (10/100 Mbit/s) port over same Single mode or Multimode fiber cable.
- Universal for Both Fiber Types: Same media converters can supports Single-mode fiber for a long distance up to 12.4miles(20Km) and Multimode fiber for a distance up to 0.31miles(500meters), wavelength 1310/1550 nm.
- Simple to Install, Plug and Play, No setup or configuration needed, SC connector for fiber optical port, RJ-11 connector for telephone ports and RJ-45 for Ethernet.
- No Delay Transmission and Protocol Support: Unlike VoIP products – these converters transmit signals directly over fiber cables, thus offering NO DELAYS, plus support for fax & legacy applications that is not supported by VoIP lines.
In stock
Additional information
| Weight | 0.809 kg |
|---|---|
| brand | Primeda-telecom |
| dimensions | 22.6 x 16.7 x 7.2 cm; 800 Grams |