1s Z+ and Z-: the Z axis will move up and down. 2s X+ and X-: the X axis will move left and right. 3s Y+ and Y-: the Y axis will move Front and Back. 4s SPIN: Spindle on (Laser on ), Spindle off (laser off) 5. Press Z+ for 5 seconds: change the Language to English. 6s SMOD: return. SD card: SD card reader is to write into the root directory G-code files . Control: Press the Enter key to enter the manual page. File: Press the Enter key to enter the file page. Settings: Press the Enter key to enter the settings page. Package: 1 x GRBL Offline Controller 1.8 inch LCD Screen 8 Pin Interface with SD Card
QPX GRBL Offline Controller 1.8 inch LCD Screen 8 Pin Interface with SD Card
$87.99
- Make sure this fits by entering your model number.
- SD card capacity can be identified below 4Gware: GRBL 08, 09, 1.1and so on.
- Chinese and English dual system, long press Z+ on the main page to switch between Chinese and English.
- Support gcode, txt, tap, nc, ncc, cnc and other formats processing files. the system recognizes up to 200 valid files at a time. (Friendly reminder:not supported Chinese name and long file name).
- Manual control: Manually adjust the position of the three axes of XYZ as the starting point of engraving, and manually turn the spindle on or off.
- File engraving: After the offline board is saved in the file, it can be connected to the GRBL control board for engraving, no need to connect to the computer.
In stock
Additional information
| Weight | 0.4 kg |
|---|---|
| brand | QPX |
| dimensions | 20 x 14.8 x 11 cm; 400 Grams |