SATA IDE PCI Express Adapter Card, 2 Port PCIe to SATA ESATA IDE Controller Adapter Card, Support ATA Hard Drives, 3Gb/s Speed

$50.99

  • Comply with PCI-Express 1.0 a standard, support for Ultra ATA 133 hard drive, and downward support for Ultra ATA 100/66/33 standard.
  • The adapter card supports hard drives with a capacity of 137 GB or more (48-bit LBA mode).
  • Support 1 external ESATA interface and 1 internal SATA interface, the transfer rate can be up to 3Gb/s.
  • Support for RAID 0/RAID 1/RAID 0+1 mode, support JBOD, with various storage methods.
  • The operation is simple, insert the adapter into the corresponding PCI-Expres slot, read the drive disk and insert the hard disk to use.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Specification:
Item Type: Adapter Card
Material: PCB
Color: Black board
Chip: For JMB363
Transfer Type: PCIe to 2 internal SATA + IDE + 2 external ESATA (external ESATA and internal SATA can only use 2 at the same time, select by jumper, the default is 2 internal SATA interfaces)
SATA Transfer Rate: Up to 3Gb/s
Supports hard drives with a capacity of 137 GB or more (48-bit LBA mode)
1 IDE interface supports up to 2 IDE devices
How to Use:
1. Open the computer case and remove the rear block
2. Insert the adapter into the corresponding PCI-Expres slot
3. After installing the chassis, turn on the device, read the drive disk, install the drive, and then connect to the hard drive for use

Package List:
1 x Adapter Card1 x Driver CD

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Additional information

Weight 0.09 kg
Brand

Yunseity