chipset compability :
All of Fixed code and learning code -2260(All the manufacturers), 2262(All the manufacturers), PT2264,5326(All the manufacturers),SC5262,HT600,HT680,HT6207,HT6010,HT6012,HT6014,SMC918 Series,527(All the manufacturers), 1527(All the manufacturers), 2240(All the manufacturers). Although different chip manufacture has different chip model prefix, it will be OK, as long as the chip model numbers are same.
Parts of single chipset compability: CAME TOP432NA/EV/EE
Some 433Mhz Brands compatible (rolling code) :
compatible on BFT MITTO2 MITTO4(old version), FAAC XT4 433RC, MotorLine MX4SP DSM, BENINCA TO GO WV, KEY TXB-42R, DEA MIO TR2, DOORHAN TX4, ATA PTX4, Peccinin TX3C, NICE FLORS, GBD AU1600, Centurion NOVA, NOVOFERM, Nice-Smilo, AN MOTOR AT-4, AAVAQ, ROSSI, FADINI JUBI, AT-4N, Codiplug NOV2, Codiplug UNIK. for the rolling code brand listed above, please re-match with your original receiver by follow the original manual after duplicatied.
Here is the way of copy
Memory Clearance:
1.Press button A and B simultaneous until LED flashes 3 times
2.Release button B(Keep pressing button A),and press button B slowly for 3 times,
LED flashes quickly.
3.Release both button,the duplicator is ready for copying
Duplicating:
Put duplicator aside of original transmitter,as close as possible.
Fixed code remote control:
Keep pressing button A of original transmitter & button A of duplicatoruntil the duplicator’s LED flashes,which means the duplicating succeed.
Repeat above step to the rest buttons.
The duplicator will work afterduplicating.
Rolling code remote control:
Keep pressing button A of original transmitter & button A of duplicator until the duplicator’s LED flashes,which means the duplicating succeed.
Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the receiver.
If for some reason the clone does not go further than 2 blinks, it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.