stall the servo into the servo mount without the servo arm or servo protection. Only the rudder is fixed. Then connect the servo to the receiver, usually CH1 or ST jack three lines are divided into. Bottom line, VCC, signal PWN. 2. After the rudder is fixed, open the remote control, set it up and then open the ESC, then the rudder will stop at a fixed position.
3. Without turning off the remote control and rudder, install the rudder protection or rudder arm to the rudder output teeth.
Specification:
Item Type: RC Servo
Housing Material: Aluminium Alloy
Servo Size: Approx. 40x20x40.5mm / 1.57×0.79×1.59in (Without Cable)
Colour: Red
Operating Voltage: 6V-8.4V
Operating Angle: 270 Degree ±3 Degree (500 to 2500usec)
Pulse Width Range: 500 to 2500usec
Neutral Position: 1500usec
Direction of Rotation: Counter Clockwise (1000 to 2000usec)
Deadband Width: 2usec
Operating Current: 140mA – 200mA
Torsion:
6V 17.2kg.cm
8.4V 20.3kg.cm
Operating Speed: 6V 0.15 Sec 60 Degrees
8.4V 0.13 Sec 60 Degrees
Applicable: For 1/10 1/12 Scale RC Cars, Robots, Ships, Robots, Etc.
Package List:
2 x RC Servo
2 x Metal Servo Arm (Random Style)
8 x Plastic Servo Arm
8 x Screw Barrel
8 x Rubber Pad
14 x Screws