Product description
Item Type: Shoes Sole Stickers
Material: PVC Rubber
Product Color: As Pictures Shown
Width: Approx 10 cm/3.9 in
Product Weight: Approx. 72-223g/2.5-7.9oz
Instructions:
1. Prepare the necessary tools: Sole stickers, small scissors.
2. Cut the appropriate length, only need to paste the front part of the high-heeled shoes that is in contact with the ground. Generally, the high-heeled shoes can be pasted 3 pairs per meter, and the flat-bottomed shoes can be pasted 2 pairs (the heel cannot be pasted).
3. Tear off the white release paper on the back and start pasting. When pasting, tear off the side stickers from top to bottom to squeeze out the air as much as possible.
4. Cut off the edges and hold it with the sole facing upwards when trimming, so it is easier to cut.
5. After sticking, press hard and repeatedly to make it firm. Wear shoes 24 hours after application.
The replacement method of the sole sticker: First use a hair dryer to heat the insole to soften the glue, and then slowly tear it off (remember not to tear it off directly to avoid hurting the surface coating of the sole).
Directions
Prepare the necessary tools: Sole stickers, small scissors. Cut the appropriate length, only need to paste the front part of the high-heeled shoes that is in contact with the ground. Tear off the white release paper on the back and start pasting. When pasting, tear off the side stickers from top to bottom to squeeze out the air as much as possible. Cut off the edges and hold it with the sole facing upwards when trimming, so it is easier to cut. After sticking, press hard and repeatedly to make it firm. Wear shoes 24 hours after application.