Buy a Solvent Weld 50mm (Actual Pipe Size is 56mm) Waste Pipe 90 Degree Knuckle Bend – Black from a large range of Knuckles in our Waste Pipe section. IMPORTANT NOTE: Solvent Weld Waste Pipe fitting sizes are often stated in metric standard measurements, however the actual pipe size is measured in imperial. The three options are as follows – 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. In addition if the term “ABS” is printed on the pipe this identifies the pipe as solvent weld waste pipe.
Solvent Black 50mm (56mm) Waste Pipe 90 Degree Knuckle Bend – Pack of 2
₪78.99
- This product is made to be installed with 56mm (known as 2 inch solvent weld) pipe or fittings. If your pipe or existing fittings measure 50mm, or has PP printed on it, then this product is not compatible and you will require 50mm pushfit or compression fittings
- Solvent weld waste pipe elbow designed to join 2 waste pipes in a sharp 90 degree configeration
- This listing is for a Pack of 2
- Solvent weld fittings are secured using solvent weld cement for a permanent and strong installation
- This is for waste water use and not rainwater drainpipe use which is a different product
In stock
Additional information
| Weight | 0.16 kg |
|---|---|
| brand | MSL |
| dimensions | 17.2 x 15.7 x 6.4 cm; 150 Grams |