1. The Water Flow Sensor is light, nimble outline, small size and easy to install. All materials are in line with SGS testing standards.2. There is an integrated hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.3. Stable, high temperature, low water pressure start.4. Can use for Water heaters, credit card machines, water vending machine, flow measurement device.5. Three wire connection: Red for positive, black for negative, yellow for pulse signalifications:Product Name: Water Flow SensorMaterial: Brass(Shell)Liquid Temperature: Not More Than 60CExternal Thread Diameter: G3/4Flow Range: 2-45L/minWorking Voltage Range: DC5VMax Current: 10mAMaximum Water Pressure: 1.75MPaConnector: Male SM-3PCable Length: 35cmSize: 60mm x 30mm x 31mm(L*W*H)Ingress Protection Rating: IP65Color: Brass ToneNet Weight: 152gPackage Included:1 x Water Flow SensorNote:1. Installed in accordance with flow direction in the product, otherwise there is no signal output.2. A filter screen must be installed at the inlet of the sensor, in order to avoid particles and debris entering the sensor.
sourcingmap G3/4″ Hall Effect Liquid Water Flow Sensor Switch Flowmeter Counter Meter DC 5V 2-45L/min SEN-HZ43WB
$44.99
- Stable, high temperature, low water pressure start.
- Brass material, small size, easy to install element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.
- The water flow sensor is applied for water heater, and can be used as flow switch.
- All materials are in line with SGS testing standards.
- Flow Range: 2-45L/min; Maximum Water Pressure: 1.75MPa
In stock
Additional information
| Weight | 0.204 kg |
|---|---|
| brand | Sourcingmap |
| dimensions | 6 x 3 x 3.1 cm; 204 Grams |