StimPads TENS Electrode Pads compatible with Compex devices. Combi-pack of 50X50 and 50X100mm with double 3.75mm Easy Snap EMS Machine Replacement Pads, certified medical device by Motron NV

Product description StimPads for Compex* electrodes. 8 Pcs of 50 x 50mm and 4 pcs 50 x 100mm SINGLE SNAP!Features:Latex FreeCE and FDA 510K approvedHigh Conductivity100% Compex* CompatibleFlexible and Excellent longevityDirection to Use:Always check the electrode gel before applying it. Gently touch the gel surface with your fingertip. If the gel does not readily adhere, run a finger under tap water and gently rub over the gel surface.Continue with this process until the entire gel surface has been completely rehydrated.The electrode gel surface should be kept free of lint and oils to maximize its life. Gently rub a clean, damp sponge over the solid gel to remove any oils or debris. After cleaning the gel return the electrodes to the correct and readable side of their protective film; return to the storage bag and place in a cool environment.Ideally store the electrodes in a shady place between 5 and 27°C with humidity levels between 30-80%. StimPads Electrodes are packed in a resealable zip bag for optimal storage before and during use. StimPads Electrodes have a shelf life of 3 years after the date of production. Electrode life may be extended by carefully following above tips and advice.Note:The lifespan of the electrodes varies depending on skin type and conditions, storage, the amount of usage, type of stimulation, and stimulation site. Expired electrodes are to be recycled and do not harm environment.(*)Compex is a registered trademark of Compex Médical SA, Switzerland. The shown electrodes are compatible with the products of Compex Médical SA. Motron NV is by no means connected to Compex Médical SA.StimPads is a registered trademark of Motron NV.StimPads Electrodes are Non-Sterile and Intended for Single Person Use Only! Legal Disclaimer StimPads is a registered trademark of Motron NV