STORMGUARD 02SR0200914W Bottom of The Door Brush Seal Draught Excluder, White, 914mm. Fitting. 1. With door closed, measure bottom of door width. 2. Slide brush out of carrier/housing and cut carrier/housing to size. 3. Using hacksaw cut brush – cut through small metal rod (only 3mm wide) holding brush in place. Tip. Crimp brush metal housing using pliers to prevent brushes falling out – i.e. squeeze ends with pliers so they are compressed. 4. Offer up door seal against door, so bottom of brush is only just above floor surface closing gap between bottom door and floor, and mark where holes appear against door with pencil. Tip. Drill pilot holes for screws so screws can be screwed in without damaging screw head. 5. Screw firmly to base of door. 6. Adjust if necessary for perfect fit – slotted holes aid adjustment up or downMGUARD White 05SR039005MW 5m Ultraseal Soft Self-Adeshive Foam Draught Excluder, L-5 Metres W-8mm H-6mmSEALS ALL GAPS 1MM-5MM – EASIER TO USE – NO RELEASE PAPER – IDEAL FOR METAL WINDOWS – MADE TO LAST FOR 5 YEARS
STORMGUARD 02SR0200914W Bottom of The Door Brush Seal Draught Excluder, White, 914mm & White 05SR039005MW 5m Ultraseal Soft Self-Adeshive Foam Draught Excluder, L-5 Metres W-8mm H-6mm
$35.99
- Product 1: seals gaps up to 25mm under a door
- Product 1: Suitable for internal or external doors
- Product 1: Adjustable fixing slots
- Product 1: Can be cut to size
- Product 2: Seals draughts through gaps 1 to 5 mm wide between the door and the frame
- Product 2: self adhesive, No fixings required
- Product 2: can be cut to size enough for 1 door
- Product 2: can be used for windows and loft hatches
In stock
Additional information
| Weight | 0.15 kg |
|---|---|
| brand | STORMGUARD |
| dimensions |