This stud finder is specially designed for you to DIY safely and efficiently, when you’re mounting TV, cabinets, photo frames, garage racks etc. It is vital that you need to understand what is behind the wall.
Equipped with intelligent microprocessor chips, The stud finder can accurately and quickly locate edges and center of metal, studs, joists, pipes, live ac wire behind walls, floors and ceilings with AC Wire Warning.
How to calibrate the stub finder
1.Place the Stud finder in unobstructed air.
2.Press the power button，switch to the desired mode
3.Press the scan button( on the left side) until you hear the short beep sound.
4.Release the scan button and move the stub finder along the wall slowly.
Stud Finder Wall ScannerWOVTE 8 in 1 Electronic Stud Detector Stud Finder, Audio Alarm and HD LCD Display for Wood, AC Wire, Metal and Screws Studs Detection
$57.99
- 6 scanning modes : The stud mode locates the center and edge of wood studs up to 1/2 inch(12 cm), 1 inch (25mm) and 1.5 inch(38 mm); Metal mode can detect metals up to 2.36inch (60 mm) and AC mode detects live unshielded AC wiring up to 2inch (51 mm), magnetic mode detects nails and screws to position studs. You can switch to the required mode to help you find the center and edge of the wood, joist, pipes,or beams, live AC wires and deeper metal in the wall accurately.
- LCD display: This stud finder comes with an HD LCD display which is very convenient to help you clear direction and accurate location of targets, audible warnings and noticeable moving direction arrow on the LCD display.The signal bar on the LCD display alerts you to the distance and direction of the approaching object, and a beep sounds to notice the location.
- Bubble Level & scan ruler: This stud finder includes a bubble level on the bottom and and a scale ruler on the top that helps prevent errors and saves time, ensuring your projects are done correctly the first time.
- Tricolor indicator light: With tricolor indicator light, its very convenient for you to notice the distance between the stud finder to objects, When it is not detected, the indicator light is green. When it is getting closer to the detection center, the indicator light is light yellow. When it is in the center, the indicator light is red.
- Easy to use: Place the Stud finder in unobstructed air. Press the power buttonswitch to the desired mode. Press the scan button( on the left side) until you hear the short beep sound. Release the scan button and move the stub finder along the wall slowly.
In stock
Additional information
| Weight | 0.18 kg |
|---|---|
| Brand | WOVTE |