The enclosed SUNLU filament container keeps out moisture and dust. Keep filaments in a low humidity environment. A rotating spool holder that allows to load filament and feed it directly to your 3D printer. Depending on the type of filament you need to dry, the temperature you use will need to be adjusted. SUNLU S1 Filament Dryer Box has 2 button that operates time and temperature. Adjustable temperature control to keep filaments between 35°C-55°C. Adjustable time functions break free of worry. Compatible with the most common hygroscopic materials 3D printing filaments’ Diameter and type: 1.75mm/2.85mm/3.00mm; ABS/PLA/PETG and so on. Package list: 1* SUNLU S1 Filament Dryer Box 1*Adaptor 1*Instruction manual
SUNLU 3D Printer Filament PLA Plus 1.75mm 1kg Spool, PLA+ Filament 1.75 +/- 0.02 mm for 3D Printing, Total 3kgs (Black, White, Grey)
$143.99
- Make sure this fits by entering your model number.
- ➽【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength；lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
- ➽【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
- ➽【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
- ➽【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
In stock
Additional information
| Weight | 3.66 kg |
|---|---|
| brand | SUNLU |
| dimensions | 23.8 x 20.2 x 19.4 cm; 1 Kilograms |