SW900 Settings. P1 = 1,2 or 3 brightness. 3 is the brightest P2 = KPH or MPH. P3 = 36 48 60 72. This is to match your battery voltage. If you have a 52v battery. Use 48. P4 = 0 Sleep timer. Personally preference. 1 = one minute. The bike will turn off automatically if no motion is detected. 0 = sleep timer is not active. P5 = 1 Pedal Assist & throttle levels &1-5. You can have levels. 1-3. 1-5. Or 1-9. 1-3 P5 = 0 1-5 P5 = 1 1-9 P5 = 2 P6 = 27.5 wheel size. EG. If you have a 29” Wheel. Change to 29. This needs to be corrected or your speed will be inaccurate. P7 = 46. How many magnets are in your motor. It’s very common that if you have a brushless and gear-less hub motor you will have 46 magnets. Mostly 1000w. 1500w 2000w and 3000w motors have 46 magnets. If your motor is a geared motor you will need this set to 1. P8-100. This needs to be set to your desired speed limit. 100 presents 100 km/h. The UK legal limit is 25 km/h. So we recommend setting this to 25. P9 = 0 best to leave it at 0. If you set it at 1. The throttle will only work when you are moving. P10-2 drive mode. P10 = 0. Means only pedal assist will work. P10 = 1. Means only the throttle will work. P10 = 2. Means both throttle and pedal assist will work. P11 = 1 Your pedal assist sensitivity levels. P11 = 1 is the most sensitive. This will go up to 24. 24 = very low sensitivity. We recommend leaving P11 = 1 P12-3 P13 = 5, 8 or 12. This is how many magnets are in your pedal assist sensor ring. Ours pedal assist sensor is normally 8. If you have 10 magnets. Use 8. P14 = 12 presents your controller amperage. If your controller is 30A. We recommend setting this a 30. If it’s a 45A. Then set P14 = 45. Max is 50. This will only work if your controller is amp sensitive. P15 = 40.5. This is not used. General you are not able to change this. If yours is different. Don’t worry. P16 = this is your odometer. There no need to adjust this. Push and hold the up arrow for 5 seconds if you want to reset your odometer.
SW900 EBike Display 24V 36V 48V 60V 72V Electric Bicycle Screen Panel Speedo Speedometer LED 5 Pin Sine Wave, DC Moto Replament 250W,350W,1000W,1500W,2000W,3000W
€84.99
- {FEATURES} Introducing the SW900 EBike Display: the ultimate dashboard for your electric bicycle. This versatile screen panel is compatible with 36V, 48V, 60V & 72Volt systems, making it suitable for a wide range of e-bikes. Also offers the ability to work with a 22mm handlebar or 31mm with rubber inserts. Multifunctional & offering a wide range of customisable settings to optimise your Ebikes ride.
- {COMPATIBLE} Our SW900 display is compatible with a wide range of controller brands and models. Sine wave. DC MOTO. Protocol type 2. OMD, YF. NOT compatible with KT or Sabvoton controllers. Offering a flat 5 pin male plug to connect to your controller. Please note this display DOES NOT have an in line round green 5 pin waterproof Juliet connector. One cable directly from the display to the flat 5 pin plug.
- {DURABILITY}. IP64 Rated. You can ride in the rain as our SW900 display is weather resistant against all others such as Snow, wind, Rain, Sun with not effect the displays performance. Also offering great visibility for night and day riding.
- {SETTINGS}. The SW900 EBike Display offers 16 customisable settings, allowing you to optimise your bikes performance for your riding style and terrain. Please scroll down to see the full setting description. With these customisable options, you can tailor the SW900 EBike Display to enhance your riding experience and ensure your e-bike performs at its best.
- {MANUAL}. The SW900 is supplied with a full user manual to help guide you with your new display & set up. If for any reason you are experiencing issues there are many guards and videos online that can help you resolve and optimise your display to your liking. Also please see more details down below in the Product Description.
In stock
Additional information
| Weight | 0.239 kg |
|---|---|
| Brand | E Bike Power UK |
| EAN | 5065021852033 |