Tamiya 58681 1:10 Gen2 Ch. TC01 Remote Control, RC Vehicle, Model Building Kit, Racing, Formula E Car

1:10 RC Formula E Gen2 Ch. TC-01 Formula E has become more and more established in recent years to become a global racing series and eventually gained the status of an official world cup by the FIA. Only electric vehicles are used in the series and therefore it was obvious that Tamiya is the world’s leading manufacturer for RC electrical models also offers them as models. The Fomula E vehicle is a replica of the Gen 2 models in the original sponsor design. The chassis has redesigned Tamiya to meet the requirements of an ultra-flat design. The TC-01 chassis is 4×4 and can be used with both Formula E bodies and normal touring car bodies (257mm wheelbase). The drive is done via gimbal drive and oil-filled differentials. Highlight is the axle geometry with lying oil pressure shock absorbers and push rods – known from the real formula racing. Required accessories: remote control with receiver, motor 540, steering servo, electronic regulator, 7.2 V battery pack, charger, body, wheels, colour for body (Tamiya PS). Technical details: model model model in 1/10 scale. Length: 430 mm, width: 188 mm, height: 99 mm. Highly detailed polycarbonate body, the ultra-flat form of Gen Formula E. cars true to car replicated. Rear spoiler and side panels made of separate polycarbonate attachments. – Halo safety bar and rear view mirror on white ABS plastic – includes extensive sticker sheet with the original sponsors – Tamiya TC-01 chassis in ultra-flat design with 4WD drive – On the chassis both Formula E bodies and standard touring car bodies can be used wheelbase: 257 mm – chassis in hybrid construction, consisting of a monococo. and a top frame – Known by TA-07 Chassis This makes it very torsion-resistant and many setup options – Inboard suspension system front and rear with horizontal dampers and same suspension arms for identical leverage front and back. – Control of the oil pressure shock absorbers via push rods and rocker arms – track, fall and run adjustable – hammers and body holders can be changed from Formula E to touring car – 4WD drive via cardan shaft (known from TB-05) with oil-filled differentials – compatible with IFMAR homologated battery packs – numerous tuning parts available box contents: assembly kit. Designer Protective Mobile Illustrated assembly instructions (English language not guaranteed): Before you start assembly, you should read and understand all the instructions (English language not guaranteed). If a child assembles the model, an adult supervision should also read the assembly instructions (English language not guaranteed). When assembling the kit, tools including knives are used. Separate care should be taken to avoid injury. If difficulty occurs during assembly, ask an adult who monitors the work or a model builder with RC experience or specialist retailer. Only use tools for purpose. If used incorrectly, there is a risk of injury. If you use paints and/or glue (not included in the kit), follow the instructions provided. Keep the kit away from young children. Prevent children from putting any components into their mouth or pulling plastic bags over their head.