Product parameters: 1) Working voltage DC 10V-35V. It is recommended to use a switching power supply DC24V for power supply. 2) 6N137 high-speed optical coupling is used to ensure high-speed without losing step. 3) Using Toshiba TB6560AHQ brand new original chip, there are low voltage shutdown, overheat shutdown and overcurrent protection circuits to ensure optimal performance. 4) The rated maximum output is: ±3A, peak value 3.5A. 5) It is suitable for two-phase/four-phase/four-wire/six-wire stepping motors within 3A of 42, 57 steps, but not suitable for stepping motors exceeding 3A. 6) Automatic half-flow function 7) Subdivision: full step, half step, 1/8 step, 1/16 step, maximum 16 subdivisions. 8) Volume: width 50*length 75*height 35 (MM) 9) Weight: 83GProducts include Motor driver*1
TB6560 3A stepper motor driver stepper motor driver board single axis controller 10 gear current
$32.99
- The current level can be adjusted step by step, and the automatic half current can be adjusted to meet your various application needs.
- Adopt 6N137 high-speed optical coupling to ensure high-speed without losing step.
- The setting instructions are printed on the board, and it can be operated without the manual.
- Using thick and dense tooth radiator, good heat dissipation.
- Note: The wiring should be checked repeatedly before powering on. Wrong wiring may burn the chip! The set current should not exceed the rated current of the motor.
In stock
Additional information
| Weight | 0.07 kg |
|---|---|
| brand | DUTTY |
| dimensions | 14.5 x 9.8 x 3.5 cm; 70 Grams |