Instructions for Use:
1. The carbon rod must be kept dry, and it can only be used after being dried when wet.
2. When used in DC power supply, the carbon rod is connected to the positive pole of the power supply, and the work is connected to the negative pole.
3. The compressed air pressure should be kept at 0.5-1.6MPa.
4. The arc distance between the carbon rod and the workpiece is about 3mm, and the exposure of the carbon rod to the fixture is about 100mm.
5. The carbon rod forms an angle of 45° with the workpiece, and is planed along the tangent (or straight) direction.
6. The carbon rod must be well ventilated when using it. Operate according to the working current.
TEN-HIGH Carbon arc gouging Carbon Rod Cylinder 10mm,Length 355mm, Quantity 10pcs
$121.99
- SIZEDiameter 10mm, length 355mm,package:10pcs.
- MaterialContains a precisely formulated blend of carbon and graphite, 80% graphite and 20% copper, using a 72-hour electroplating process with a thick coating
- High QualityHigh temperature resistance, easy to conduct electricity, high welding efficiency.
- Cylinder Carbon RodIt is mainly used for welding seam, back slotting and clearing welding gap.
- ApplicationIt is widely used in foundry, boiler, shipbuilding, chemical industry and other industries to plan low carbon steel, cast steel, stainless steel, copper and other metals.
In stock
Additional information
| Weight | 0.46 kg |
|---|---|
| Brand | TEN-HIGH |