Specification:
Item Type: Depth Sounder
Material: Stainless steel 316L, anti fog glass, ABS
Mounting Hole Diameter: Approx. Φ52mm/2in
Depth Indication Range: 0-100m/0-328FT
Backlight Color: White
Operating Voltage: DC 12V
Instantaneous Voltage: DC 9-32V, up to 16v
Operating Current: 60mA
Operating Temperature: -30 °C- + 75 °C
Storage Temperature: -40 °C – + 85 °C
Dial Waterproof Rating: IP67
Back Cover Waterproof Rating: IP5
Operation:
A. This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power
B. Keypad”Mode”: Quick press the keypad”Mode” to switch SH/DP/KL/ UN Hold the keypad”Mode” to turn on/off the monitor Short press the keypad”▲””▼”to set the value required Hold the keypad”▲””▼”to keep the digital increasing/decreasing fluently.
Parameter: SH: (Low level alarm) Range: 0-0.6-19.9, when the level no more than value(SH) appointed,the symbol flickering and the buzzer beeps all the time. If SH=0 –>No alarm Alarm setting range :0.6-19.9
Range: 1). Unit”M”: 0-99 2). Unit”FT”:0-199 3). Unit”F”: 0-49 If the level exceed the a ppointed value , the buzzer will beeps twice Keel offset (KL):
Range: 1). Unit”M”: 0-6.0 2). Unit”FT”:0-19.9 3). Unit”F”:0-3.3
packing list:
1 x Depth Sounder
1 x Transducer (with 10m cable)
2 x Screw
1 x Power Cord
1 x Manual