For more information on Instruction, How to Set Clocking Range, How to Set Parameters, see Preview ImageSpecifications: Voltage: DC 5V~36V. Trigger Signal Source: High voltage level trigger (3.0V~24V), signal ground and system ground are not on common ground to improve the system’s anti-jamming capability (you can also connect them on common ground). Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. Quiescent Current: 20mA Operating Current: 50mA Working Temperature: -40℃~85℃ Clocking (Time Delay) Range: 0.1seconds to 999minutes Size: 60*34*12mm / 2.36*1.33*0.47″Note: 1. The module is an active output, the output voltage equal to the input voltage. 2.’DC + ‘and’ load + ‘ are internally shorted(connected), but’ DC- ‘and’ load – ‘ cannot be shorted, otherwise the load cannot be controlled on and off, which is equivalent to load being powered on alwaysage Includes: 1 x Timer Switch Module
Trigger Cycle Delay Relay Adjustable LED Display Timer Switch DC 5V-36V
AUD $34.99
- To achieve fast high frequency turn-on and off circuit, an unlimited number of switching times. No noise was made during turning on/off, no spark, and no electromagnetic interference. Compared to normal electromagnetic relay modules, it has a longer service life.
- Dual-MOS in parallel active output, lower inner resistance, larger current, strong power; at room temperature, operating current is up to 15A, power up to 400W, that can be used for most equipment. Wide voltage input from 5V to 36V, normally used for controlling DC motors, lights, LED strips, micro-pumps, solenoid valves, etc., very convenient.
- It has an emergency stop function (“STOP” button) and reverse input protection. Automatically enter sleep mode and shut off display if no operation in 5 minutes, and will be wake up by pressing any button. You can set different OP, CL, LOP parameters, which are independent of each other, and are saved separately; All parameter settings will be saved automatically if there is a power failure.
- Relays Enable Mode: 1. ON: Relay allows conduction in the “OP” on-time; 2. OFF: Relay prohibits conduction and is always closed; In the main interface, press the “STOP” button to switch between ON and OFF, the current state will flash, and then return to the main interface. (This feature is an emergency stop function, press on button to disconnect relay)
- Sleep Mode: 1. “C-P” Sleep mode: five minutes without any operation, the digital display automatically turns off, the program running as usual; 2. “O-d” Normal mode: digital display turns on always; Press hand hold the “STOP” button for two seconds to switch “C-P” and “O-d” state, the current state flashes and then return to the main interface.
In stock
Additional information
| Weight | 0.02 kg |
|---|---|
| ean | 0712979564864 |
| brand | YWBL-WH |
| dimensions |