Function Description
Set Button:
-Short press: Cycle switching white light, warm light, neutral light.
-Long press: When the light is on, press the button to turn on and adjust the brightness, and release the button to lock the brightness.
Power Button:
-The initial state is off
-Press first time to enter steady on mode: The induction function does not work in steady on mode. light not automatically extinguish.
-Press the button a second time to enter the daytime induction mode:
light flashes for 2 times as the prompt, and then enter the daytime induction mode after the flashing.
-Press the button a third time to enter the night induction mode:
light flashes for 3 times, and then enters the night induction mode.
-Press the button a fourth time will to returnthe closed state.
Special Description of Sensor Mode
1. Set [Night] sensing mode. Under the condition of sufficient light, the lamp will not turn on even if it senses a person. Only when the light is insufficient and a person is sensed, the light will turn on;
2. Set [Day] sensing mode, regardless of whether the light is sufficient. The light will turn on automatically when it senses a person;
3. After the induction area is opened high, the light will automatically burn out in about 20 seconds;
4. If people are always in the sensing area, the dynamic light will keep on.
Specification:
Power Supply: 1000mA Lithium Battery
Light Source: 3 x High Bright LED
Luminous Flux: 85 lumens
Light Color: Warm White/Cold White/Natural Light
Light CCT: 3000K/4500K/6000K
Material: ABS/PC
Product Weight: 131g