Victron Energy Cyrix-Li-Charge CYR010120430 Batterieüberwachung

Function of Cyrix battery coupler in general. The Cyrix-Li-Ct 12/24V-120A is a high-performance microprocessor-controlled relay that automatically switches batteries in parallel when one of them has reached a specified voltage value (indicating that the battery is being charged) and that separates the batteries again when the voltage drops below the trickle voltage value (indicating that one or Both batteries just discharged both batteries straight ). Cyrix battery couplers are excellent for replacing separating diodes. Its main feature is that there is virtually no voltage loss, so that the output voltage of the AC generators or the battery chargers do not need to be increased. Operation of the Cyrix-Li-Charge 12/24V 120A. The Cyrix-Li-Charge 12/24V-120A connects a battery charger to a LiFePo4 battery with a delay time of 3 seconds. 1. When the output “Charge Disconnect” of the VE. Bus BMS is high and 2. When it measures 13.7V (or 27.4V or 54.8V) or more on its battery charger port and 3. and when it measures 2V or more at its battery port (the Cyrix remains open when not connected to the battery) The Cyrix Li Charge shuts off immediately when its control output reaches the state “free floating” (open circuit), indicates cell surge or cell overtemperature. In general, a cell surge alarm is reset shortly after stopping charging. The Cyrix then reconnects the charger. After trying twice to reconnect the device at a time of 3 seconds, this delay time extends to 10 minutes. Whenever the battery voltage is below 13.5V (or 27V or 54V), the Cyrix switches off with a delay time of 1 hour.