pe: Booster Pump
Working Voltage: 24V
Insulation Class: Class H
Supercharging Effect: 80Pa
Noise: Low noise
Open Mode: Automatic water flow control
Flow: 20L/min
Head: Approx. 20meter / 65.6ft
Piping Inner Diameter: Approx. 15mm / 0.59in
Fluid Temperature: 0-65℃
How to Use:
Installandusedirectly.
Package List:
1 x Pump
1 x Power Adapter
1 x Water Pipe
1 x User Manual
1 x Double Sided Tape
2 x Screw
2 x Expansion Screw
or1 x Pump
1 x Power Adapter
1 x Water Pipe
1 x User Manual
2 x Screw
2 x Expansion Screw
Note:
1. Friendly Reminder: The water pump has a built in water flow switch valve. The minimum flow rate of 1.5L/min need to be met before the valve can be flushed to start the pump. If the water flow switch cannot be flushed, the power supply must be disconnected again for 3‑5 seconds, and the water pump will be forced to start for 10 seconds. If it is powered on and works for 10 seconds, it will automatically stop, indicating that the water flow switch valve is not opened.
2. Test Method: Take a mineral water bottle and connect. Generally, a mineral water bottle is a 500ml bottle, and about 3 bottles can be connected in one minute, which can be installed and used.
3.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.