Product Description
Algaecide helps to prevent the growth of algae in swimming pools. Used each week it is an effective means of controlling algal growth when used in conjunction with a disinfectant. Dose Rate As an initial dose add: 100ml WAVE Algaecide to 1000L of pool water. Then as a weekly dose: 20ml Wave Algaecide to 1000L of pool water. When algae are present in the water Check the pool water to ensure a pH of around 7.4 and shock dose with chlorine or an alternative sanitiser. Brush the walls and floor of the pool and then backwash the filter to clean. Add the initial dose of WAVE Algaecide. Check the pH and chlorine levels daily and the pool for traces of algae ‘green’. If any traces remain after 48 hours repeat the shock dose. Application Add WAVE Algaecide into 10 litres of fresh water, using a clean plastic container, and mix carefully. Slowly pour the solution into the pool water close to the return inlets and rinse out the container thoroughly. Directions
1. Add algaecide into 10 litres of fresh water, using a clean plastic container, and mix carefully. 2. Use the algaecide each week to prevent the growth of algae in swimming pools, hot tubs, and spas. 3. Use the algaecide in conjunction with a disinfectant for optimal algae control.
Wave Relax Algicide, Algaecide Algae Remover for Swimming Pool and Spa Hot Tub Water Treatment, Highly Effective Formula, 1 Litre
AUD $65.99
- Algaecide helps to prevent the growth of algae in swimming pools. Used each week it is an effective means of controlling algal growth when used in conjunction with a disinfectant.
- Add WAVE Algaecide into 10 litres of fresh water, using a clean plastic container, and mix carefully.
- 1L size.
- Works in Hot tubs, Spas and Pools.
In stock
Additional information
| Weight | 1.09 kg |
|---|---|
| Brand | WAVE |
| EAN | 5054487582295 |