How to Use:
Lighting Description:
1. The LED indicator shows a steady blue light, indicating that the switch is on.
2. The LED indicator light is off, indicating that the switch is in the off state or off networ mode. (In off networ mode, the manual switch has no status indicator, please pay attention to operation safe).
3. The LED indicator light flashes blue slowly, indicating that the product is in pairing mode.
Steps:
1. Connect the wire from the upper end of the circuit breaker to the lower end, please make sure the wiring is correct and the WiFi signal is strong.
2. Turn on the phone’s Bluetoo and WiFi, open the APP, then long press the POWER button, wait for about 5‑10 seconds, the LED indicator will slowly flash blue.
3. After waiting for a while, the po up window will po up, click the + in the upper right corner, then select the ADD DEVICE button, and wait for the device to be recognized.
4. Enter the wifi account password and click Nex, wait for the connection to the networ
5. Connect to the networ.
Specification:
Item Type: Smart Switch Breaker
Material: Red Copper, PA66
Application: Intelligent home control
Applicable APP: For Smart Life
Rated Operating Voltage Range: ~230V
Control Type: Remote control, manual
Poles: 1P+N (N pole through)
Control Method: for SigMesh, for ZigBe
Rail: DIN35
Product Size: Approx. 82x68x18mm/3.2×2.7×0.7in
Package List:
1 x Smart Switch Breaker