WilTec Airbrush Gun Type 130 double action function

This professional airbrush gun is not suitable only for pros. The model is particularly suitable for ample and uniform application of paint but also for uneven layers of paints and paintwork, due to the nozzle diameter of 0,3 mm and the big paint cup. The regulation of paint-/air mixture is ensured by the double-action-function. The required paint-flow volume can be adjusted with the adjusting screw at the end of the handle. Explanation of double action (DA) function As single-action is called an airbrush, if only the air volume is regulated with the operating lever and the paint volume with another regulator. In the case of double-action airbrush this happens with a lever: by pressing down the lever you regulate the airflow, by turning it back(at the same time) you can regulate the paint volume. By activating the control lever downwards, the compressed air flows forwards, out off the needle cap. First by pressing the control lever backwards, the paint comes out of the nozzle and is sprayed on the object due to the air pressure. The more one presses the control lever backwards, the more paint is sprayed. This requires practice, but nothing can prevent that the air flow regulation is carried out by means of compressor, so that it is recommended to use a double-action airbrush from the beginning. The maximum paint volume can be set at the back on the knurled screw (paint volume-adjusting screw) . Note At the beginning of the spraying process: First start the air, then the paint! At the end of the spraying process: First take away the paint, then the air! Functions and technical data – Length : 147 mm – No plastic components! – Chromed housing – Rust free needle system – Inflow over gravity – Excellent spray pattern – Box dimension: 230 x 146 x 33 mm – Paint cupr 7ml with lid – Working pressure: from 1 to 3,4 bar – Noozle with 0,3 m