Wind Solar Hybrid Charge Controller Wind Regulator DC 12V/24V Wind Turbine Generator Solar Panel 400W / 800W

The solar charging uses a series charging control method to increase the charging efficiency by 3%-6%. At the same time, the controller MCT charging function tracks the maximum current of the solar panel in real time, and the charging method is more efficient. Specification:  Condition: 100% Brand New Item Type: Wind and Solar Hybrid Controller Color: Black  Size: Approx. 13 * 8.2 * 2cm / 5.1 * 3.2 * 0.8in Weight: Approx. 384g / 13.5oz Self Power Consumption: The Static Average Power Consumption : Approx. 13mA. During Charging And Discharging : Average 15 mA Maximum Discharge Current: 20A Working Environment Temperature: -35-75 °C Charging Mode: MGT Mode ( Tracking Maximum Current) Package list:  1 * Wind and Solar Hybrid Controller Wiring Mode: 1. Connect all the positive poles of the load, battery and solar panel to the red line of the controller. 2. Connect the negative pole of the load again.3. Then connect the negative electrode of the battery to the negative electrode of the controller. At this time, the controller conducts self-check. After passing the self-check, all the indicators are on, then the other indicators are off and the power indicator is on. After 6 seconds, the load light is on, indicating that the discharge is normal.4. Connect the negative pole of the solar panel to the negative pole of the solar panel of the controller, and the charging lamp of the controller is on, the discharge lamp is off, and the charging system is normal. If you connect at night, the control will not enter the charging state, and the discharge state of the third step will still be maintained until the discharge timing of the controller is completed.5. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line of the wind turbine respectively.6. After the whole wiring is finished, please wrap the connector with wate