The NMEA 2000 Tank Adapter YDTA-01 allows you to connect an existing resistive type fluid level sensor installed on a tank and display the fluid level on NMEA 2000 devices, including chart plotters and instrumental displays. The Adaptor can be configured to report one of the seven fluid types defined in the NMEA 2000 standard: Diesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. The tank number can be configured up to 16 tanks of one type are allowed in an NMEA 2000. The Device can be used with European (10 to 180 Ohm range) American (240 to 33 Ohm range) or Japanese (0 to 310 Ohm range) standard fluid level sensors as well as with any nonstandard sensors with maximum resistance less than 400 Ohm. The Adapter is supplied with a connector compatible with SeaTalk NG or a connector compatible with NMEA 2000 Micro Male. For other networks, an adaptor cable may be required.
Yacht Devices Tank Adapter YDTA (NMEA 2000 or SeaTalk NG)
$389.99
- The Adapter can record liquid level to the MicroSD card, but you can also use a recording device like our Voyage Recorder to store data from multiple Adapters along with all other vessel data.
- You can use our Wi-Fi Gateway to see all your tanks right from a browser or marine apps.
- The Adaptor can also be configured with special “Installation Description” strings.
- Some MFD’s allow entering a text to device’s properties. This text is usually used to save installation notes, the device location or the installer’s contacts.
- You can also enter these strings with our free CAN Log Viewer software, connected to NMEA 2000 with the USB Gateway or Wi-Fi Gateway.
In stock
Additional information
| Weight | 0.141 kg |
|---|---|
| dimensions | 11.43 x 9.02 x 4.95 cm; 113.4 Grams |