Yoiimiya Waterproof 5G LTE Antenna External Omni-directional Antenna for 3G/4G/5G Modems and Routers with 16-18dBi Gain and 698-3800MHz Frequency Range, Ideal for Outdoor Use with Network Cards

$78.99

  • Designed specifically for outdoor installation with a cable length of 5m, it can be placed in outdoor areas including home roofs, utility poles, surveillance trailers, offices, and any other location you desire.
  • The omnidirectional antenna cable connector is an SMA male connector, and comes with a 15cm SMA female to TS9 splitter cable, which can be used with modems and routers that have SMA male/TS9 connectors. The corresponding interface is SMA/ and the device frequency is compatible.
  • Frequency range: 698-3800MHz, compatible with 3G, 4G, and 5G routers and modems, upgrading network signals. Gain: 16-18dBi. Direction: omnidirectional. Cable type: RG174.
  • The antenna has a sturdy waterproof structure, and the U-shaped hook slot design ensures stronger wind/rain/frost resistance, weather resistance, and impact resistance. It can be used indoors or outdoors to enhance and maintain excellent signal quality.
  • Easy to install, no software required. The antenna should be installed vertically to maximize performance, and should not be installed on metal. Before use, please turn off the device, connect the antenna, and then turn on the device again.
  • Note: If you want to receive a 5G signal, please ensure that the router’s power is above 20W. If the power is insufficient, it may not be able to drive the antenna and receive the 5G signal. There are no specific requirements for the router regarding 3G and 4G signals.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Frequency range: 698-3800MHz
VSWR: <2.0 Gain: 16-18dBi Polarization: Vertical Radiation: Omnidirectional Max power input: 10W Input impedance: 50 ohms Connector type: SMA male, TS9 Cable type: RG174 Cable length: . 5m Notes: 1) This is a LET antenna and cannot be used as a WiFi antenna. 2) Objects should be avoided to block between the antenna and the base station. 3) The antenna needs to be installed vertically. 4) The ground will absorb radio signals. Increase the height appropriately when the signal is weak. 5) Avoid proximity to water, which will affect the radio signal. 6) There should be no metal inside the antenna, otherwise it will affect the signal. 7) If there is no signal during the first installation, cancel the installation and re-adjust the position. 8) After the installation is completed, the router needs to be restarted to check whether the signal strength has changed and whether is stable. Note: If you want to receive a 5G signal, please ensure that the router's power is above 20W. If the power is insufficient, it may not be able to drive the antenna and receive the 5G signal. There are no specific requirements for the router regarding 3G and 4G signals.

Additional information

Weight 0.59 kg
Brand

Yoiimiya

EAN

4894923835117