1 x CAT7 LSA Connection Box Cat 7 Connector Connection Module Network Cable Extension for Installation Cable CAT.7 CAT.6a CAT.6 Connecting Repair Ethernet Internet LAN Cable Junction Box

.7.
Repair your damaged network cable or extend your existing cable in no time. The cable ends are securely connected using the so-called LSA cutting terminals and closed in a shielded housing. For wall mounting, use either the mounting holes provided in the box or the included double-sided adhesive strips.
Highlights:
– Cat7 connection module.
– Operating frequencies up to 500 MHz (tested at 600 MHz).
– Backwards compatible with other transmission standards: CAT.5e, CAT.5, CAT.6, CAT.6A, CAT.7
– For AWG 24 – 22 installation cables with wire diameter 1.0 – 1.6 mm.
– Supported cable outer diameter: 5.0 – 9.0 mm
– Cable clamp sets for different cable diameters are included.
– Connecting / repairing Ethernet (network), Internet or ISDN cables.
– Shielded housing (metallised, refined plastic casing).
Installation instructions:
– Cut approx. 70 mm of the cable sheath.
– Turn the braid shield together and place it back over the cable sheath to create a contact surface.
– Attach the cables with matching cable clips.
– Lead the cable wires to the LSA terminals and shorten the excess foil shielding of each wire pairs. When connecting the wire pairs, make sure to guide the pair shields as close as possible to the LSA terminals and to shorten accordingly.
– Clamp the individual wires according to the diagram with a LSA insertion tool. Pay attention to the strand colour. This must be precisely adhered to.
– Close the housing of the connection box.