Parameters:
Model: LHHT40-SF2-2
Colour: black.
Dimensions: 140 x 110 x 85 mm / 5.5 x 4.3 x 3.3 inches.
Weight: 1600 g
Package contents:
1 x pyrography machine.
2 x pyrography pens.
2 x pen holders.
1 x cleaning sponge.
1 x cutting cutter.
20 x wire tips.
Material: plastic + iron.
Pyrography Machine Note:
1. When charging the pen tip, the screw with which the pen tip is tightened should be pressed and tightened against the heating wire of the pen tip to avoid poor contact between the pen tip and the connector.
So that the tip is not hot and the terminal is overheated to burn the accessories.
If the terminal is too hot, i.e. the pen tip is not tightened, it must be tightened in time with a screwdriver.
2. When selecting the heating wire, you should choose an electric heating wire under 1 mm for the pin tip.
Do not choose iron wire or other non-heating wire materials for the pen tip.
This is dangerous, and it is easy to burn all the accessories in the movement, and it is easy to get an electric shock and fire.
Note:
1. The pyrography wiper sponge must be saturated with water before use.
2. Since the coke produced in pyrography at high temperature has a certain degree of oil viscosity,
It is easy to stick to the top of pyrography, which directly affects the effect of topography.
If there are carbon deposits on the pen, do not use metal or emery cloth to polish.
Worn pen heads greatly affect the life of the pen heads, and the surface of the pen head is rough.