Installation instructions: 1. Make sure your LED strip is 10 mm wide WS2811/ WS2812B RGB LED strip with 3 copper contacts. 2. Open the connector. 3. Cut off your LED strip carefully along the cutting line. 4. Insert your LED strip into the connector, with the 3 copper contacts on your LED strip under the 3 electrical conductors in the connector. Make sure to match the + electrode on your LED strip to the + electrode on the connector. 5. Close the connector. Important note: If the connection is loose, the LEDs will flash or do not light up. To ensure a tight connection and good electrical conductivity, please refer to the following steps: After inserting the LED strip into the connector, before closing the connector, slightly pull and push the LED strip to adjust the connection point, until the LEDs light up. If the LEDs do not light up, please use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to make the positions of the 3 electrical conductors become lower. In this way, the 3 electrical conductors in the connector can totally touch the 3 copper contacts on the LED strip, and this will ensure good electrical conductivity. Package includes: 20x 3 Pin LED connector for 10mm wide WS2811/ WS2812B RGB 5050 LED strip
20pcs Solderless 3 Pin RGB LED Strip Connector for 10mm wide WS2811 WS2812B Addressable SMD 5050 RGB LED Tape Light Dream Color LED Band Connecter 3pin Flex LED Ribbon Extender LED Rope Light Adapter
AUD $30.99
- Make sure this fits by entering your model number.
- 3-pin LED connector for 【10mm wide】 WS2811/ WS2812B RGB 5050 LED Strips.
- Usage: to connect 2pcs WS2811/ WS2812B RGB LED strips together.
- Installation without tools, easy installation via clip system. No need to weld.
- NOT suitable for 8mm wide 3-pin RGB LED strips.
- 20pcs.
In stock
Additional information
| Weight | 0.02 kg |
|---|---|
| brand | BoHong |
| dimensions | 12.4 x 10.6 x 0.4 cm; 20 Grams |