ntrol with battery (if you need extra remote control, please tell us).
1 x receiver.
Receiver
Channel: 1 channel
Radio frequency: 433 MHz.
Operating voltage: DC12 V.
Code type: learning code
Maximum operating current: 10 A.
Working temperature: -10’C + 70’C
Antenna: with internal antenna.
Control Mode Description
Toggle (1 button on / same button off)
Momentary (button function, relay pulls on as long as button pressed)
Latch (1 button on/one other button off)
Control mode setting
Jumper on 2 & 3 Toggle (1 button on / same button off)
Jumper on pin 1→ Momentary (button function, relay pulls on as long as button pressed)
Jumper to 1&2→ Latch (1 button on/one other button off)
Learn Code
Learning: Press the learning button when the display is off, then press the remote control, light is on, it means that the reading is successful.
delete code
Press and hold the learning button approx. 8 seconds, and the display will be ON from OFF, then press the remote control, the receiver has not worked, it means that all stored codes have been successfully deleted.