3 x Motorlift 4330E, 4332E, 4333E, 4335E compatible hand transmitter, replacement transmitter, 433.92 MHz rolling code. 3 pieces top quality replacement devices.

These are 3 pieces of high quality 433.92 MHz rolling code Motorlift compatible remote control replacements, that replaces your Motorlift 4330E, 4332E, 4333E, 4335E remote controls. Parameters: 433.92 MHz rolling code frequency; battery and keychain included; high quality remote replacement. Compatible with the following Chamberlain Liftmaster Motorlift Remote Controls: 4330E (4330EML, G4330E, G4330) – 4332E (4332EML, G4332E, G4332) – 4333E (4333EML, G4333E, G4333333333333E, G4E, G4E, G43333333333333E, G4E, G4E ) – 433 5E (4335EML, HE4331, G4335E, G4335) How to program your remote: Program to gate/garage door openers the same way as original Chamberlain Liftmaster remotes, please refer to your receivers user manual. For a typical Chamberlain 8002E receiver, the programming procedure is as follows: 1. Press and hold the remote control push button. 2. Press and release the Learn button in the control centre on the opener panel. The indicator light will flash once. 3. Release the remote push button. Now the opener will operate when the remote control push button is pressed. Note: If you release the remote control push button before the indicator lights flash, the opener will not accept the code. To erase all codes from the receiver, hold the receiver’s Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased. PROGRAMMING VIDEO –>https://www.youtube.com/watch?v=FwsVMJUYTHU. If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.store.de/dp/B01MTOYB0F. If you have any questions about your purchase please contact us.