Bike Crank Extractor and Bottom Bracket Remover:
Specification:
Material:iron
Colour:red,silver,ferrous
Size:
Wrench:159x20mm/6.28×0.79inch
Crank extractor:76x17mm/3.0×0.68inch
Flywheel tool:25x20mm/0.98×0.79inch
Bottom bracket tool:50x27mm/1.97×1.06inch
Crank Removal Tool Included:
1 x Wrench
1 x Crank Extractor
1 x Bottom Bracket Remover
1 x Flywheel Tool
Use Description:
1.Start with the centre axle repair tool. Insert one of its ports into the hole in the centre axle (in the lower frame). Then rotate the Centre Axle Repair Tool until it lines up with the Centre Axle and holds tight.
2.Next,use the Crank Removal Tool. Stick the remover into the gap in the crank and place it on the tooth disc crank.
3.Using a spanner, turn the crank remover bolt clockwise. This will disengage the crank from the centre shaft.
4.Repeat the above steps to remove the other tooth disc crank from the centre shaft.
CAUTION:
1.Due to the difference of light and screen, the colour of the item may be slightly different from the picture.
2.Please allow 1-2cm difference due to manual measurement.