5 Channel DMX Decoder with RDM Digital Display,DMX512 Dimmer Driver PWM LED Controller for RGBCCT,RGBWW,RGBW or 5 White lightstrips LED Module Light Input 12V-48VDC

Channel DMX512 Decoder Introduction: Welcome to use the 5CH constant decoder, which take advantage of advanced microelectronic control technology. This technology changes the international fashion,DMX512/1990 standard digital control signals into analog control signals. There are 1 ~ 5 output channels; each channel can achieve 256 control levels. Products Performance: Output DMX : 5 Channels Input Power: DC12V~DC48V Maximum load current: 4A ×5 Channels Input Signal: DMX512/1990 Engine size: 175mm*46mm*32mm Package include: 1 x DMX decoder System parameter setting ● Long press M and ◀ key in the same time for 2s, prepare for setup system parameter: grey level, output PWM frequence, output brightness curve, default output level, automatic blank screen. short press M key to switch five item. ● Grey level: short press ◀ or ▶ key to switch 8bit(“b08”) or 16 bit(“b16”). choose 16 bit if the DMX master support 16 bit. ● Output PWM frequency: short press ◀ or ▶ key to switch 250Hz(“F02”), 500Hz(“F05”), 1000Hz(“F10”), 2000Hz(“F20”), 4000Hz(“F40”) or 8000Hz(“F80”).Higher PWM frequency, will cause lower output current, higher power noise. ● Output brightness curve: short press ◀ or ▶ key to switch linear curve(“C-L”) or logarithmic curve(“C-E”). ● Default output level: press ◀ or ▶ key to change default 0-100% level (“d00” to “dFF” ) when no DMX input signal. ● Automatic blank screen: short press ◀ or ▶ key to switch enable (“bon”) or disable(“boF”) automatic blank screen. ● Long press M key for 2s or timeout 10s, quit system parameter setting.