Product description:
High quality.
The main body of each tile leveller is made of high quality PP material. The T-shaped pin is made of stainless steel. It is durable and does not rust. It can be reused.
Areas of use:
The tile leveller is suitable for tile joints between 2 and 6 mm and is suitable for tiles from 5 mm to 17 mm thick.
Easy to use.
Tile levelling discs are easy to use and install, and the included special key makes it easy to attach and remove the leveller.
Application:
1. Place the first piece of brick, the seam ≥ 2 mm or higher and near the second brick.
2. Insert the T-pin along the crack, then turn it 90 degrees, clamp the T-pin at the bottom of the two bricks and tighten the adjustment cover with your hand and the special wrench so that the two stones are at the same level.
3. Before the cement or tile adhesive is completely dried (usually no more than 6 hours), tighten the adjustment cover in the opposite direction, then turn the T-pin 90 degrees and remove the leveller.
4. Clean them before the tile adhesive is completely dried and they can be reused many times.
Specifications:
Material:PP+Stainless Steel
Color: black and orange
Size: as shown in the picture.
Matching spacers 2~8mm
Suitable for tile thickness:5~20mm
Quantity:51pcs
Box contents:
50 x Tile Levelling System
1 x Special Key