ons:
1. Remove the wheel from the vehicle.
2. Lever the tyre from the rim using a tyre lever.
3. Remove the old tube and check the tyre for damage. Find the cause of damage and remove it.
4. Insert the valve from the hose into the valve opening of the rim. Insert the hose carefully into the jacket. Fill the hose a little with air.
5. Pull the tyre onto the rim with a pry tool.
6. Inflate the hose slowly. Make sure the rim of the tyre is correctly attached to the rim and the hose is not accidentally clamped. If this happens, let the air out and restart.
60 x 230 Pushchair Inner Tube 12 Inch 12 x 1.95 (60 x 230) with Angle Valve 45 | Pack of 2 | for Tyres Pushchair 12 Inch 60 x 230 cm
NZD $99.99
- Reliability: Premium rubber made of 1.2mm butyl rubber that absorbs external shocks on paved roads and can be used for a long time.
- Originality: the diameter and thickness are perfect for replacing two rear low-profile tyres of pushchairs: Anex sport, Bebetto, Tutis Zippi, Anmar Hilux, Rico Vario, Cam Cortina, Peg Perego Duo, Verdi.
- Comfort: With the valve bent to 45 degrees, you can inflate the wheel with any pump in the house. Forget about the problem of torn off chamber fitting. The optimal air pressure for the wheel is between 1.2 and 1.5 bar.
- Safety, for all seasons. The hose material is lead-free and can also be stored near food in the home. The tube is very wear-resistant and can be used safely in any season and in all weather conditions.
- Replacement method: Inflate the pipe easily. Insert the tube into the tyre and distribute it evenly throughout the tyre. Install the valve fitting into the wheel. The valve should be on the outside of the pushchair. Install the outer tyre on one side of the rim and then on the other side. Inflate the wheel up to 1.2 – 1.5 bar. If you have any problems, please feel free to contact us We offer 30 days free return or free exchange.
In stock
Additional information
| Weight | 0.27 kg |
|---|---|
| Brand | AVVS tech |
| EAN | 0765066168902 |
| UPC | 765066168902 |