The tile leveling system 1.5mm for leveling and leaving joints in floor and wall the system ensures flatness between tiles avoiding movements during the mortar setting.
The operation of wedges and disposable tile clips is extremely simple and convenient, can complete the construction quickly and with high quality in a short time.
Tile Spacer create fine grout line of 1.5mm, clean joints that are always the same width.
Specification
Material: PP
Suitable for Tile Thickness: 5mm-14mm
Tile gaps width: 1.5mm
Color: White & yellow
Package includes:
500 x Tile Clips + 100 x Tile Wedges
Steps:
1. Put the base into the bottom of the tile, fix the base with one hand, and squeeze the wedge with the other hand
2. Squeeze the base and press the tiles down until the two tiles are level
3. Keep a certain distance between the bases according to the specifications of the tiles, or place them on the corners of the tiles
4. Wait for the tiles to dry, usually after 24 hours, knock with a rubber hammer or kick off
Note:
1. Before putting thetiles, remember to erase some of the cement on the edge of tile, this will prevent the cement from being wrapped in theclamps after the clips are placed.
2. If there is too much cement in the gap between tiles, it is recommended to use tools such as blades for cleaning.
3. The grouting line will be affected by mud and other fillers during actual installation, making it slightly larger than 1.5mm.