Those crystal connectors are made of high quality PC material,which uses upgraded design to make them suitable for waterproof or non-waterproof RGBW/RGBY LED light strips.
Upgrade design does not need to be welded, the connection is firm and stable, the light strip never fall off.
Suitable for 6PIN 12mm wide SMD5050 LED RGB CCT strip light.
The sticker under the light strip does not need to be torn and the outer pvc of the wire does not need to be stripped when installation.
Rated voltage: 0-36V
Rated current: 5A
Interface type: 6pin
Working PCB width: 12mm
Working environment temperature: -20~50℃
Installation Tips:
1. Cut the strips and wires to the length you need, and then fully open the clamp.
2. Push the strap in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers)
3. Push the wire into the wire end of the connector, and then press it down firmly to ensure that the pin pierces the wire sheath. (You can use pliers and other tools)
4. Reminder: both IP20 non-waterproof and IP65 waterproof light strips. You can pierce the light bar from the back or the front. The IP20 RGB light bar is recommended to be pierced from the front of the light strip, and the IP65 waterproof light bar is recommended to be pierced from the back without removing the silicone on the surface of the light bar. If you accidentally cover the connector, you can pry it off with a screwdriver.
Package includes:
10 x LED 6-pin 12mm light strip connectors
1 xLED Extension cable
Please read the size instruction carefully before purchasing.
Not applicable to 10 mm/ 0.393 inches LED strips.